Overclocking Asus A8N32-SLI deluxe

[Fasttazz]

Where do i start? Was there a previous thread for this board? Cannot find it.
I am new to overclocking,any tut's for doing this?

[fps justin]

Originally Posted by Fasttazz

Where do i start? Was there a previous thread for this board? Cannot find it.
I am new to overclocking,any tut's for doing this?

lower your HTT frequency or multiplier. It should be lowered to either 3x or 600mhz, which ever is on your board. If you want, you may want to set up a cpu//ram divider, but you ram is very nice quality ram, so it should be good to go without a divider. Then just slowly increase the fsb with 5 or 10mhz intervals and when you get your first blue screen, turn the fsb back 10mhz and slowly increase 1-2 mhz each time until you find your limit. Of course, you also need to adjust the cpu voltage accordingly to how far you want to push your cpu.

MY 3000+ venice did 2.7ghz (300mhz fsb * 9 multiplier) with 1.55volts. I suggest staying under 1.5v unless you have a nice cpu cooler.

[Fasttazz]

Thanks for the reply Justin.
I am still lost on where to start.

[gvblake22]

START HERE