|
| |||||||
| Home | Forums | Rules | All Albums | Blogs | Donate | Subscriptions | Register | Mark Forums Read | vBExperience |
| Motherboards Get or give help selecting the best motherboard to build your system around. |
 |
| | LinkBack | Thread Tools |
March 1st, 2008
| #1 | ||||||||||||||
| Educated Idiot
Join Date: Jun 2007 Location: Indiana
Posts: 222
|  Whats wrong with this board now? Ok.....when ever I use one of the sata ports on the jmicron (I guess you call it) to plug in my extra hard drive OR if I plug one of my dvd burners into it....which is port ez raid 1 or ez raid 2..I always get a "4th master hard disk" error during boot up. It didn't do this before, it only started happening when I wiped my hard drive and reinstall everything. I've reinstalled everything the exact same way. I need to use both of these ports because I have 3 hard drives and 2 dvd burners. no raid converation. Just C drive and 2 storage drives. What's the deal?  Antec 900 Q6600, GO stepping, 3.21 MHz P5w DH Deluxe Sapphire Radeon X1950 Pro 512mb 2 Gb OCZ platinum revision 2 DDR2 6400 800hz OC to 892mhz Lapped Zalman 9700 nt 150gb raptor 320gb seagate PC Power & Cooling 750w PSU (2) lite-on 20x dvd burners 22 inch HP w2207 monitor.  | ||||||||||||||
|  | ||||||||||||||
|
March 1st, 2008
| #2 | ||||||||||||||
| Educated Idiot
Join Date: Jun 2007 Location: Indiana
Posts: 222
| Re: Whats wrong with this board now? Does anyone have any ideas? Anyone? Antec 900 Q6600, GO stepping, 3.21 MHz P5w DH Deluxe Sapphire Radeon X1950 Pro 512mb 2 Gb OCZ platinum revision 2 DDR2 6400 800hz OC to 892mhz Lapped Zalman 9700 nt 150gb raptor 320gb seagate PC Power & Cooling 750w PSU (2) lite-on 20x dvd burners 22 inch HP w2207 monitor. | ||||||||||||||
|
| | ||||||||||||||
|
March 1st, 2008
| #3 | ||||||||||||||
| I have a life
 Join Date: Apr 2006 Location: New Jersey
Posts: 919
| Re: Whats wrong with this board now? Go in the bios and set the controller to SATA IDE mode. I used that board, and I plugged my optical into the SATA header closer to the CPU\back panel... Quad Core Xeon 3210@2.8ghz GA-EP35C-DS3R 466FSB 2x1gb OCZ-1333 DDR3@1400MHZ Sapphire 4870 512mb GDDR5 2x Raptor 150 ADFD RAID 0--WD320YS RE 16mb Samsung SuperWritemaster 20x DVDRW X-Fi eXtremeGamer w\Logitech Z-2300 Silverstone OP650 54A 12v Rail Torture Rack--Custom Danger Den WCing | ||||||||||||||
|
| | ||||||||||||||
|
March 1st, 2008
| #4 | ||||||||||||||
| Educated Idiot
Join Date: Jun 2007 Location: Indiana
Posts: 222
| Re: Whats wrong with this board now? I've got 2 opticals though. the error message is gone now....but EZ Raid 1 port isn't showing anything. I've got the two burners in Sata 3 and 4, the storage drives in EZ RAID ports 1 and 2, the plastic jumpers on the 2 slots on the left hand side set at Big mode/JBOD (Originally it was on Raid 1). got sata IDE mode, ezraid disabled. I've tried everything. Went to the Asus website....no ones answered there yet.  Antec 900 Q6600, GO stepping, 3.21 MHz P5w DH Deluxe Sapphire Radeon X1950 Pro 512mb 2 Gb OCZ platinum revision 2 DDR2 6400 800hz OC to 892mhz Lapped Zalman 9700 nt 150gb raptor 320gb seagate PC Power & Cooling 750w PSU (2) lite-on 20x dvd burners 22 inch HP w2207 monitor. | ||||||||||||||
|
| | ||||||||||||||
|
|
| Thread Tools | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| This is just wrong | oldman_gamer | HL Lounge | 13 | April 1st, 2008 17:54 |
| I could be wrong | Jokerswild | HL Lounge | 4 | January 18th, 2008 08:20 |
| Whats wrong with the news networks? | Capper | HL Lounge | 3 | September 20th, 2007 17:36 |
| C2D something REALLY wrong PLEASE help! | [Dr. V] | Troubleshooting | 20 | February 10th, 2007 05:33 |
| This one is wrong | simple_inhibition | HL Lounge | 5 | February 2nd, 2007 12:52 |
