Memory?

Mithosphere · December 29th, 2006

Ok I have yet another question, the timings for my RAM are stated to be 3-3-3-12, yet my mobo and cpuz somehow doesnt quite use those. Now i have tried to change the settings, but i can never get it to be 3-3-3-12, it always chages the last number to like 16 or 19 or something larger than 12. Right now im running a 512MB stick @ 5-3-3-19-21 (this is from cpuz). Under the options in the BIOS, it only allows the user to change the first 4 numbers. Is there any way to get those timings?

**Capper** · December 31st, 2006

TechPowerUp has a tool called Systool, give it a shot.

SysTool - System Tweaking and Overclocking Utility

jph1589 · December 31st, 2006

What speed is that memory running?

Those advertised timings are for the memory if it is running at 533mhz. I was confused by that with my memory too. I think it is the same as yours. The spd timings for it running at 667 are 5-3-3-15 and so far I've never been able to get it running at 3-3-3-12 unless I slow it down.

So my point is that you may not get there depending on what speed you are running.

December 29th, 2006	#1
Mithosphere Yeah, so are your pants! Join Date: Jul 2006 Location: Cherry Capital of the World Posts: 564	Memory? Ok I have yet another question, the timings for my RAM are stated to be 3-3-3-12, yet my mobo and cpuz somehow doesnt quite use those. Now i have tried to change the settings, but i can never get it to be 3-3-3-12, it always chages the last number to like 16 or 19 or something larger than 12. Right now im running a 512MB stick @ 5-3-3-19-21 (this is from cpuz). Under the options in the BIOS, it only allows the user to change the first 4 numbers. Is there any way to get those timings? Pentium D 915\|EVGA 7050 mATX\|OCZ XTC 2GB\|XFX 7900GS XT\|Hyper Type-R 580W\|Qmicra 2 Case

December 31st, 2006	#2
Capper I'm Evil Join Date: Dec 2005 Location: Las Vegas, NV Posts: 5,662 Blog Entries: 6	Re: Memory? TechPowerUp has a tool called Systool, give it a shot. SysTool - System Tweaking and Overclocking Utility INTEL QX9650 ASUS P5E3 Premium 4GB DDR3-1600 Sapphire HD 3870X2 Danger Den Tower-26 (Custom W/C) 5 x Seagate 250GB HDD in RAID5 BFG ES 800W PSU

December 31st, 2006	#3
jph1589 Join Date: Aug 2006 Posts: 367	Re: Memory? What speed is that memory running? Those advertised timings are for the memory if it is running at 533mhz. I was confused by that with my memory too. I think it is the same as yours. The spd timings for it running at 667 are 5-3-3-15 and so far I've never been able to get it running at 3-3-3-12 unless I slow it down. So my point is that you may not get there depending on what speed you are running. Commodore 64 overclocked into outerspace

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
which is better memory for oc	herr_kingkong	Memory	1	April 21st, 2008 15:00
WTB: DDR-333 Memory 1GB and up	RA1D	Buy/Sell/Trade	2	January 31st, 2008 07:32
My new memory.	Beetle Bailey	HL Lounge	4	December 30th, 2007 04:49
Memory Over Voltage	Kent10	Overclocking	7	October 15th, 2007 04:30
What memory should I buy?	TrOx	Memory	27	April 3rd, 2006 15:33