OC **** - Page 2

Quakindude · January 23rd, 2007

Good going and Congrats! Now if you were to unlink your memory, I bet you could go even higher.

You're CPUz in your first post shows your memory at a 2T command rate. Your memory should be able to run at 1T.

**PrOLifIC_onE** · January 23rd, 2007

We actually tried 1T and windows booted up to my desktop for about 10 seconds before I got some errors and then the BSOD. So I decided to leave it at 2T and be happy

**One4yu2c** · January 23rd, 2007

Yeah, 1T was a no-go, even after bumping up the DDR voltage. But that's okay, a 500MHz bump trumps 1T, and then some.

Quakindude · January 24th, 2007

Quote:

Originally Posted by One4yu2c

Yeah, 1T was a no-go, even after bumping up the DDR voltage. But that's okay, a 500MHz bump trumps 1T, and then some.

Hell yeah it does!

**PrOLifIC_onE** · January 24th, 2007

And I ran a Memory Benchmark using Everest. While the compared PCs are not OC'd, I was rather surprised that mine benchmarked close to some DDR2s.
Compared to the Computers they had listed, mine was #3 (Reading), #7 (Writing), and #2 (Latency)...

I know the comparison list is limited but I was surprised to be that high up.

EverestMemoryReport.htm

Quakindude · January 24th, 2007

DDR2 memory is just now settling into it's stride. I wasn't an early adopter because at first, the fastest DDR2 still wasn't faster than DDR400 with tight timings. The potential was there though and we are now seeing the results in memory bandwidth/performance that DDR2 was made for in the first place. The technology had to mature enough to get the higher Bus speeds and tighter timings to make it better than DDR400.

January 23rd, 2007	#11
Quakindude I'm Diggin it! Join Date: Oct 2006 Location: Fort Rucker, AL. Posts: 2,754 Blog Entries: 7	Re: OC **** Good going and Congrats! Now if you were to unlink your memory, I bet you could go even higher. You're CPUz in your first post shows your memory at a 2T command rate. Your memory should be able to run at 1T. Q6600@ 3.2GHz w/ CNPS9700 \| EVGA 780i \| 2Gb Corsair DDR2-800 \| EVGA GTX 280 1Gb Video \| 1x WD 640Gb HDD, 2x Seagate 400Gb HDD, 1x250Gb WD \| 2x Samsung SH-203B Opticals \| Antec 900 \| ABS/Tagan BZ700 700W PSU Last edited by Quakindude; January 23rd, 2007 at 13:54.

January 23rd, 2007	#12
PrOLifIC_onE 5 Minute Mod Man Join Date: Dec 2006 Location: Michigan Posts: 686 Blog Entries: 1	Re: OC **** We actually tried 1T and windows booted up to my desktop for about 10 seconds before I got some errors and then the BSOD. So I decided to leave it at 2T and be happy

January 23rd, 2007	#13
One4yu2c I don't know how to put this, but, I'm kind of a big deal. Join Date: Jan 2006 Location: Land of the Lounge Lizards Posts: 2,630 Blog Entries: 3	Re: OC **** Yeah, 1T was a no-go, even after bumping up the DDR voltage. But that's okay, a 500MHz bump trumps 1T, and then some.

January 24th, 2007	#15
PrOLifIC_onE 5 Minute Mod Man Join Date: Dec 2006 Location: Michigan Posts: 686 Blog Entries: 1	Re: OC **** And I ran a Memory Benchmark using Everest. While the compared PCs are not OC'd, I was rather surprised that mine benchmarked close to some DDR2s. Compared to the Computers they had listed, mine was #3 (Reading), #7 (Writing), and #2 (Latency)... I know the comparison list is limited but I was surprised to be that high up. EverestMemoryReport.htm

January 24th, 2007	#16
Quakindude I'm Diggin it! Join Date: Oct 2006 Location: Fort Rucker, AL. Posts: 2,754 Blog Entries: 7	Re: OC **** DDR2 memory is just now settling into it's stride. I wasn't an early adopter because at first, the fastest DDR2 still wasn't faster than DDR400 with tight timings. The potential was there though and we are now seeing the results in memory bandwidth/performance that DDR2 was made for in the first place. The technology had to mature enough to get the higher Bus speeds and tighter timings to make it better than DDR400. Q6600@ 3.2GHz w/ CNPS9700 \| EVGA 780i \| 2Gb Corsair DDR2-800 \| EVGA GTX 280 1Gb Video \| 1x WD 640Gb HDD, 2x Seagate 400Gb HDD, 1x250Gb WD \| 2x Samsung SH-203B Opticals \| Antec 900 \| ABS/Tagan BZ700 700W PSU

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CSS **** guide	onebxr	Gaming	4	January 17th, 2007 20:44
I'M TOTALLY **** css QUESTION	halutzparilla	Gaming	7	December 16th, 2006 20:22