[PROJECT] "The Toaster" - Page 9

Parker · January 26th, 2008

Quote:

Originally Posted by yellowhello

As my history teacher would say... "Old people trapped in molasses move faster than you!"

:eviltongue: AHAHAAHAHAHAAA!!!!!

Elysium · January 28th, 2008

Question: 5.25 bay res or T? My Swiftech Micro-Res is having a hard time finding a place in the H2G0, so which is the better route? BTW, if I went with the T, it would probably be THIS one.

Parker · January 28th, 2008

There's no place to put the micro-res? Come on, you can be creative right??
Lol, I'd go with a T if you can't find a place for the micro, and I'd get this delrin fill port, btw.

**gvblake22** · January 29th, 2008

Yeah, I'm sure you can find a way to mount that res you have. They don't call it the Micro-Res for nothing!

Elysium · January 29th, 2008

I'm serious, there isn't any way to mount it. Well, there is one place but the tubing run from my res to the pump isn't possible, the tubing kinks.

BTW, have you seen THIS build, that's what I gotta live up to!!!!!

Parker · January 29th, 2008

Mount it on the inside of the plastic piece that you mount your disc drives on.

You can also mount your pump on the opposite side (closer to the CPU)

BTW, I got Photoshop CS finally :)

**gvblake22** · January 29th, 2008

Hell, why not put it on the side panel right above the motherboard rear I/O panel or in front of the PSU's modular connections?

Elysium · January 29th, 2008

No good inside the 5.25 area, already tried, it's too tall. I might be able to put it above the I/O area, but then the outlets would interfere with the radiator area. In front of the PSU isn't good either, there would be no way to fill it.

Parker · January 29th, 2008

Why don't you mount the pump directly on the cpu?
Well wait, you'd have to use an elbow for the outlet.....

Where are you going to mount your rad? in the front or back of the case?

Elysium · January 29th, 2008

Quote:

Originally Posted by Parker

Why don't you mount the pump directly on the cpu?
Well wait, you'd have to use an elbow for the outlet.....

Where are you going to mount your rad? in the front or back of the case?

Directly on the CPU? I don't understand... picture?

BTW, my loop is like this: Pump>CPU>Rad>Res/T

Radiator is going in the front, I'd like to keep everything internal.

January 28th, 2008	#82
Elysium Fields Join Date: Mar 2007 Location: Pacific Grove, CA Posts: 4,407	Re: [PROJECT] "The Toaster" Question: 5.25 bay res or T? My Swiftech Micro-Res is having a hard time finding a place in the H2G0, so which is the better route? BTW, if I went with the T, it would probably be THIS one. E8400 DFI Blood Iron P35-T2RL 4GB G.Skill 800MHz Sapphire Radeon HD3870 512MB Silverstone DA650W WD 250GB + Seagate 320GB

January 28th, 2008	#83
Parker Bowser pwner. Join Date: Jan 2008 Location: East Bay, CA Posts: 1,657 Blog Entries: 1	Re: [PROJECT] "The Toaster" There's no place to put the micro-res? Come on, you can be creative right?? Lol, I'd go with a T if you can't find a place for the micro, and I'd get this delrin fill port, btw.

January 29th, 2008	#84
gvblake22 Modder-ator Join Date: Dec 2005 Location: Tempe Desert Posts: 6,479 Blog Entries: 1	Re: [PROJECT] "The Toaster" Yeah, I'm sure you can find a way to mount that res you have. They don't call it the Micro-Res for nothing!

January 29th, 2008	#85
Elysium Fields Join Date: Mar 2007 Location: Pacific Grove, CA Posts: 4,407	Re: [PROJECT] "The Toaster" I'm serious, there isn't any way to mount it. Well, there is one place but the tubing run from my res to the pump isn't possible, the tubing kinks. BTW, have you seen THIS build, that's what I gotta live up to!!!!! E8400 DFI Blood Iron P35-T2RL 4GB G.Skill 800MHz Sapphire Radeon HD3870 512MB Silverstone DA650W WD 250GB + Seagate 320GB

January 29th, 2008	#86
Parker Bowser pwner. Join Date: Jan 2008 Location: East Bay, CA Posts: 1,657 Blog Entries: 1	Re: [PROJECT] "The Toaster" Mount it on the inside of the plastic piece that you mount your disc drives on. You can also mount your pump on the opposite side (closer to the CPU) BTW, I got Photoshop CS finally :) Last edited by Parker; January 29th, 2008 at 11:35.

January 29th, 2008	#87
gvblake22 Modder-ator Join Date: Dec 2005 Location: Tempe Desert Posts: 6,479 Blog Entries: 1	Re: [PROJECT] "The Toaster" Hell, why not put it on the side panel right above the motherboard rear I/O panel or in front of the PSU's modular connections?

January 29th, 2008	#88
Elysium Fields Join Date: Mar 2007 Location: Pacific Grove, CA Posts: 4,407	Re: [PROJECT] "The Toaster" No good inside the 5.25 area, already tried, it's too tall. I might be able to put it above the I/O area, but then the outlets would interfere with the radiator area. In front of the PSU isn't good either, there would be no way to fill it. E8400 DFI Blood Iron P35-T2RL 4GB G.Skill 800MHz Sapphire Radeon HD3870 512MB Silverstone DA650W WD 250GB + Seagate 320GB

January 29th, 2008	#89
Parker Bowser pwner. Join Date: Jan 2008 Location: East Bay, CA Posts: 1,657 Blog Entries: 1	Re: [PROJECT] "The Toaster" Why don't you mount the pump directly on the cpu? Well wait, you'd have to use an elbow for the outlet..... Where are you going to mount your rad? in the front or back of the case?

LinkBacks (?) LinkBack to this Thread: http://forums.hardwarelogic.com/f22/project-toaster-11305.html
Posted By	For	Type	Date
www.411overkill.com • View topic - Resistance is Futile	This thread	Refback	May 15th, 2008 12:52
www.411overkill.com • View topic - Resistance is Futile - YerBuddy's been at it again	This thread	Refback	March 20th, 2008 05:34
Upcoming Reviews - Page 3 - Bootdaily Forums	This thread	Refback	January 7th, 2008 10:06
Upcoming Reviews - Page 3 - Bootdaily Forums	This thread	Refback	December 12th, 2007 07:25
Upcoming Reviews - Page 3 - Bootdaily Forums	This thread	Refback	December 10th, 2007 16:10
Upcoming Reviews - Page 3 - Bootdaily Forums	This thread	Refback	December 10th, 2007 10:00

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Patriot Memory Introduces "LITE" Series 32GB & 64G	News Hound	Press Releases	0	October 13th, 2008 18:31
Unibind "Portfolio" Wins Binding Industries Associ	News Hound	Press Releases	0	September 22nd, 2008 17:31
[PROJECT] "The blank.box"	Parker	Mods & Ends	307	August 13th, 2008 12:58
D-Link busts out "Green Ethernet" energy-saving fi	Capper	Internet/Networking	4	August 9th, 2008 14:43
New Project: "tinyBEAST"	Dr. V	General Computing	22	January 29th, 2008 21:26