[Project] I Need a Theme - Page 2

theburan · April 4th, 2008

The scythe s-flex is an amazing fan, as long as you buy more than one at a time.

Yellowhello · April 4th, 2008

Quote:

Originally Posted by Stormcrow

For high-end 120mm I'd recommend Scythe S-flex, Panaflo (Rexus) with the hydro-wave bearing if you can find them, or Antec Tri-Cools.

Agreed. I also have to highly recommend the Zalman ZM-F3 fans. I have six of them sitting in the computer next to me, and they are very reasonable as far as noise. Airflow is great too, I have them blowing through my Thermochill PA 120.2.

Silverdusk · April 5th, 2008

Thanks guys for the input. I have a couple of the 600rpm Scythe's. I may just use those instead. I''ll be using the Yate Loons on the Thermochills for now, I may do away with them and go with Scythes later. The Yate's were a price I couldn't beat. And after shelling out $800.00 on water cooling I'm having to watch my pennies a little :)

**simple_inhibition** · April 5th, 2008

TWO PA120.3's!!!! thats redonkulous!

halutzparilla · April 5th, 2008

isnt raid using a 2x 320 rad??? a little bit overkill...

RA1D · April 5th, 2008

a little bit overkill for some people, a little bit awesome for others...

Parker · April 5th, 2008

Quote:

Originally Posted by RAID

a little bit overkill for some people, a little bit awesome for others...

Haha!! I somehow knew you were going to post something like this.......

I cannot wait for pics of this build man!!!!!!!

**simple_inhibition** · April 5th, 2008

1 PA120.3 is more than enough for me, but then all im cooling with it is my cpu lol

Silverdusk · April 7th, 2008

heh ..it's Raid's fault! No really, I had decided to go that route a while ago for the ability to throw just about anything at my watercooling setup, but after weeks of research, Raid's design was what I favored the most.

Torture Rack is finished and being shipped! Woohoo...

Silverdusk · April 9th, 2008

Which would you use? I have 3/8"ID by 5/8"OD compression fittings all the way around except for two items which I can't use them.

My FuZion Block and my S-Max NB Block. So out of the two fittings below which would you use? Both have a 1/2" ID. I know I'll be restricted by the lowest diameter system wide ((which is 3/8")), but I'm curious if you guys think one of these barbs is better than the other?

EK on the left and D-Tek on the right

April 4th, 2008	#11
theburan oh noes Join Date: Feb 2008 Location: Rapid City, SD (ish) Posts: 932 Blog Entries: 3	Re: [Project] I Need a Theme The scythe s-flex is an amazing fan, as long as you buy more than one at a time. e8500@4ghz\|Asus P5k-e WiFi\| 4gb OCZ ReaperX\|2x 3870's\|1.3tb storage space\|MSI tv tuner.

April 5th, 2008	#13
Silverdusk Wandering but not lost... Join Date: Mar 2008 Location: Virginia Beach, Va. Posts: 57	Re: [Project] I Need a Theme Thanks guys for the input. I have a couple of the 600rpm Scythe's. I may just use those instead. I''ll be using the Yate Loons on the Thermochills for now, I may do away with them and go with Scythes later. The Yate's were a price I couldn't beat. And after shelling out $800.00 on water cooling I'm having to watch my pennies a little :)

April 5th, 2008	#14
simple_inhibition socket 939 junkie Join Date: Mar 2006 Location: In front of my pc in Ft Bragg XD Posts: 1,469 Blog Entries: 1	Re: [Project] I Need a Theme TWO PA120.3's!!!! thats redonkulous!

April 5th, 2008	#15
halutzparilla ako the pinoy Join Date: Jul 2006 Location: by the beach Posts: 1,698	Re: [Project] I Need a Theme isnt raid using a 2x 320 rad??? a little bit overkill... Abit IP35-E C2D E6750 G0 @ 2.66ghz [TR Ultra120EX] EVAG 8800GTS [TR HR03] Corsair [2gbDual@800] 820GB HDD[120/200/500] Antec TP 550W Silverstone Temjin 09 Saitek Eclipse1 & Razer DeathAdder Windows Vista Ultimate 32bit

April 5th, 2008	#16
RA1D 5GHz 24/7 Join Date: Apr 2007 Posts: 1,132	Re: [Project] I Need a Theme a little bit overkill for some people, a little bit awesome for others...

April 5th, 2008	#18
simple_inhibition socket 939 junkie Join Date: Mar 2006 Location: In front of my pc in Ft Bragg XD Posts: 1,469 Blog Entries: 1	Re: [Project] I Need a Theme 1 PA120.3 is more than enough for me, but then all im cooling with it is my cpu lol

April 7th, 2008	#19
Silverdusk Wandering but not lost... Join Date: Mar 2008 Location: Virginia Beach, Va. Posts: 57	Re: [Project] I Need a Theme heh ..it's Raid's fault! No really, I had decided to go that route a while ago for the ability to throw just about anything at my watercooling setup, but after weeks of research, Raid's design was what I favored the most. Torture Rack is finished and being shipped! Woohoo...

April 9th, 2008	#20
Silverdusk Wandering but not lost... Join Date: Mar 2008 Location: Virginia Beach, Va. Posts: 57	Re: [Project] I Need a Theme Which would you use? I have 3/8"ID by 5/8"OD compression fittings all the way around except for two items which I can't use them. My FuZion Block and my S-Max NB Block. So out of the two fittings below which would you use? Both have a 1/2" ID. I know I'll be restricted by the lowest diameter system wide ((which is 3/8")), but I'm curious if you guys think one of these barbs is better than the other? EK on the left and D-Tek on the right

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Todays Project	Hitman	Mods & Ends	16	June 23rd, 2008 10:10
July Build - silent, cool but powerful theme	Bokranator	General Computing	18	May 1st, 2008 04:43
looking for different XP theme...	halutzparilla	Software & OSs	13	January 13th, 2007 07:54
Changing the Windows Theme?	fps justin	Software & OSs	7	March 27th, 2006 15:53
Project: C Three Zero Zero A 56K*	Pen_Fifteen	Mods & Ends	18	March 12th, 2006 14:05