Machination Level 2: A Work Log *56K Safe* - Page 3

Tyreal · February 11th, 2006

yea i know lol.
the pic i have shows everything. there is a bit more though underneat but its the nb voltages.

could it be the "adjust cpu ratio"?
the manual says:

Quote:

This item lets you adjust the CPU ratio. Setting to [Startup] enables the CPU running at the fastest speed which is detected by system. Setting options are: [Startup]. [x4] ~ [x25]

i hate service pack 2. its keeping me from overclocking. :evil:

**gvblake22** · February 11th, 2006

Quote:

Originally Posted by Tyreal

yea i know lol.
the pic i have shows everything. there is a bit more though underneat but its the nb voltages.

could it be the "adjust cpu ratio"?
the manual says:

Quote:

This item lets you adjust the CPU ratio. Setting to [Startup] enables the CPU running at the fastest speed which is detected by system. Setting options are: [Startup]. [x4] ~ [x25]

Yep. That would be it then. Just go into the BIOS and hit "Enter" on that setting and see what options it gives you. If they range from 4x to 9x, then yes, that is the CPU multiplier ;)

Quote:

Originally Posted by Tyreal

i hate service pack 2. its keeping me from overclocking. :evil:

Yeah, I don't like SP2 either, but it shouldn't limit your overclock.... :?

Tyreal · February 11th, 2006

Alright! great man. thanks alot. cleared that up for me. I really think that these companies should keep their BIOS names the same. It would really help alot.

Tyreal · February 11th, 2006

sweeeet. i decided to cancel my service pack update and save that for another time when im not using my comp.

my current o/c: FSB * Multi = Clock Speed
230 X 9 = 2070 mhz
Voltage: 1.42

**gvblake22** · February 11th, 2006

Quote:

Originally Posted by Tyreal

my current o/c: FSB * Multi = Clock Speed
230 X 9 = 2070 mhz
Voltage: 1.42

What's your LDT multi?
For 200mhz HTT or less use 5x or auto
For 201-249mhz HTT use 4x
For 250-330mhz use 3x

And you can probably just leave the voltage at stock for those speeds.

Tyreal · February 11th, 2006

my LDT was 4x.

i can't seem to get any higher than this without being unstable:
220 X9 = 1.980
Vcore is 1.42
LDT is 4x.

any ideas? i might have to run with a divider.
at 230 i can get into windows but everything crashes.
anything higher it can almost get into windows but blue screens,

**gvblake22** · February 11th, 2006

What are your RAM timings/voltages/settings?

Tyreal · February 11th, 2006

sorry. timings are as followed:
2.5-4-4-8-12-16
volts: auto
freq: 220

fps justin · February 11th, 2006

yeah, joe now your experiencing my pain. =P i can't get my damned cpu past 2.115: 235 * 9

Tyreal · February 11th, 2006

ROFL. i know man....

February 11th, 2006	#23
Tyreal Join Date: Jan 2006 Location: British Columbia, Canada Posts: 2,557	Alright! great man. thanks alot. cleared that up for me. I really think that these companies should keep their BIOS names the same. It would really help alot. I Like Watercooling. D-Tek Fuzion, MCP655, MCR220

February 11th, 2006	#24
Tyreal Join Date: Jan 2006 Location: British Columbia, Canada Posts: 2,557	sweeeet. i decided to cancel my service pack update and save that for another time when im not using my comp. my current o/c: FSB * Multi = Clock Speed 230 X 9 = 2070 mhz Voltage: 1.42 I Like Watercooling. D-Tek Fuzion, MCP655, MCR220

February 11th, 2006	#26
Tyreal Join Date: Jan 2006 Location: British Columbia, Canada Posts: 2,557	my LDT was 4x. i can't seem to get any higher than this without being unstable: 220 X9 = 1.980 Vcore is 1.42 LDT is 4x. any ideas? i might have to run with a divider. at 230 i can get into windows but everything crashes. anything higher it can almost get into windows but blue screens, I Like Watercooling. D-Tek Fuzion, MCP655, MCR220

February 11th, 2006	#28
Tyreal Join Date: Jan 2006 Location: British Columbia, Canada Posts: 2,557	sorry. timings are as followed: 2.5-4-4-8-12-16 volts: auto freq: 220 I Like Watercooling. D-Tek Fuzion, MCP655, MCR220

February 11th, 2006	#29
fps justin Join Date: Jan 2006 Location: Vancouver, BC Posts: 1,199	yeah, joe now your experiencing my pain. =P i can't get my damned cpu past 2.115: 235 * 9 E2140 @ 375 x 8 = 3.0ghz 2x1 ocz system 1337s pc2-6400 5-5-5-15 @ 450mhz gigabyte P35 S3L eVGA 7600GT Stock 120 gig seagate ULTRA X-Finity 600w Sonata 2 w/ top fan G5 Lazer Mouse

February 11th, 2006	#27
gvblake22 Modder-ator Join Date: Dec 2005 Location: Tempe Desert Posts: 6,351 Blog Entries: 1	What are your RAM timings/voltages/settings?

February 11th, 2006	#30
Tyreal Join Date: Jan 2006 Location: British Columbia, Canada Posts: 2,557	ROFL. i know man.... I Like Watercooling. D-Tek Fuzion, MCP655, MCR220

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FDA Says Cloned Animals Safe for Food	Capper	HL Lounge	15	January 16th, 2008 12:22
New Entry level and budget chassis from Thermaltak	Pete	Case & PSU	11	June 15th, 2007 09:43
Biostar 6800XT..is auto overclock safe?	ttomm46	Graphics	3	June 2nd, 2007 18:49
Antec Nine Hundred noise level?	okron1k	Case & PSU	5	February 27th, 2007 15:21
Is it safe to cut the frame of a case?	PimpingBox	Case & PSU	16	July 4th, 2006 13:44