C2D Core Temp. Post your screen shot - Page 6

oldman_gamer · January 14th, 2008

Thanks..think I will pass on this for now.

Yellowhello · January 14th, 2008

Quote:

Originally Posted by oldman_gamer

Thanks..think I will pass on this for now.

For now... but when the overclocking fairy comes a-callin', you won't be able to resist!

oldman_gamer · January 14th, 2008

I cant even figure out how to get this stuff to run,let alone clock it.As long as I can run some games,i'll be happy.

Yellowhello · January 14th, 2008

Quote:

Originally Posted by oldman_gamer

I cant even figure out how to get this stuff to run,let alone clock it.As long as I can run some games,i'll be happy.

You'll be able to run some (most?) games pretty decently with that 8600GT, but don't expect to run Crysis on high at a huge res.

screwballl · January 14th, 2008

Quote:

Originally Posted by yellowhello

You'll be able to run some (most?) games pretty decently with that 8600GT, but don't expect to run Crysis on high at a huge res.

Don't expect to run Crysis at a reasonable framerate at a high res (anything over 1440x900 or 1280x1024 in SLI either...

oldman_gamer · January 14th, 2008

I wont buy it till all the bugz are exterminated anyway.I may have a better card by then too.I may end up getting another of the same card to run SLI.See how work goes in the spring time.

Craigleberry · January 16th, 2008

My load temps now after having lapped my thermalright IFX-14 and applied some MX-2

Yellowhello · January 16th, 2008

The voltage is really low or the V-droop is horrible (looking at CPU-Z's voltage readings) on that board... and that may be causing good temps. But no one's complaining!

Good job!!!!!!!!

Craigleberry · January 16th, 2008

Quote:

Originally Posted by yellowhello

The voltage is really low or the V-droop is horrible (looking at CPU-Z's voltage readings) on that board... and that may be causing good temps. But no one's complaining!

Good job!!!!!!!!

I have set them volts to 1.200
I did have them set at 1.375 but at 1.200 it runs Orthos stable for over an hour so if it can do that then I guess it is stable?

polobunny · January 17th, 2008

Quote:

Originally Posted by Craigleberry

I have set them volts to 1.200
I did have them set at 1.375 but at 1.200 it runs Orthos stable for over an hour so if it can do that then I guess it is stable?

Can take longer than 1 hour. Normally around the block a 24 hours run is considered stable.

January 14th, 2008	#51
oldman_gamer redrum Join Date: Dec 2007 Location: Northeast Pennsyltucky Posts: 1,295 Blog Entries: 1	Re: C2D Core Temp. Post your screen shot Thanks..think I will pass on this for now.

January 14th, 2008	#53
oldman_gamer redrum Join Date: Dec 2007 Location: Northeast Pennsyltucky Posts: 1,295 Blog Entries: 1	Re: C2D Core Temp. Post your screen shot I cant even figure out how to get this stuff to run,let alone clock it.As long as I can run some games,i'll be happy.

January 14th, 2008	#56
oldman_gamer redrum Join Date: Dec 2007 Location: Northeast Pennsyltucky Posts: 1,295 Blog Entries: 1	Re: C2D Core Temp. Post your screen shot I wont buy it till all the bugz are exterminated anyway.I may have a better card by then too.I may end up getting another of the same card to run SLI.See how work goes in the spring time. Last edited by oldman_gamer; January 14th, 2008 at 18:28.

January 16th, 2008	#57
Craigleberry Join Date: Jan 2008 Posts: 66	Re: C2D Core Temp. Post your screen shot My load temps now after having lapped my thermalright IFX-14 and applied some MX-2 CPU-E6750 @3.24 GHz stock volts RAM-Geil 667 @800Mhz GIGABYTE- GA-P35-DS3P THERMALRIGHT IFX-14 CPU Cooler SAPPHIRE X1950 Pro Windows xp pro "If in doubt get a bigger hammer"

January 16th, 2008	#58
Yellowhello Stoopid Head Join Date: Mar 2007 Location: Pacific Grove, CA Posts: 4,256	Re: C2D Core Temp. Post your screen shot The voltage is really low or the V-droop is horrible (looking at CPU-Z's voltage readings) on that board... and that may be causing good temps. But no one's complaining! Good job!!!!!!!! Intel Core 2 Duo E8400 + Thermalright Ultra 120 Extreme DFI Blood Iron P35-T2RL + Thermalright HR-05 IFX 2GB G.Skill 800MHz F2-6400PHU2-2GBHZ EVGA GeForce 8800GTS 320MB Silverstone Decathlon 650W Western Digital 250GB SATA II

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Real Temp vs. Core Temp?	PkL728	Overclocking	10	June 17th, 2008 10:19
Core Temp .95.4 will not load	Kent10	Software & OSs	11	November 18th, 2007 11:04
Broncos CB Williams shot and killed	stinger608	HL Lounge	9	January 1st, 2007 19:56
Post your record videocard temp...	Sovereign	Graphics	13	November 14th, 2006 19:03
My first ever shot making a website	Lead Head	HL Lounge	39	October 16th, 2006 21:44