C2D Core Temp. Post your screen shot - Page 4

Stormcrow · January 4th, 2008

Probably they haven't updated the generation list in awhile, and since Core 2 is basically a revised dual core Pentium M it shows up like that.

**gvblake22** · January 5th, 2008

You picked a bad (good) time of year to start a temperature comparison thread!

Here's my E2140 at stock with a 63 degree F ambient room temperature and air cooling...

screwballl · January 5th, 2008

I would say bad because heaters are running this time of the year heating up the computer rooms... during the summer with the AC on my room is about 75º instead of 82-84ºF

polobunny · January 5th, 2008

Quote:

Originally Posted by screwballl

I would say bad because heaters are running this time of the year heating up the computer rooms... during the summer with the AC on my room is about 75º instead of 82-84ºF

Believe it or not, but the heater is turned off in my room, even yesterday when it was -4F outside. I'm in folding@home and my computer alone heats my room. =)

screwballl · January 5th, 2008

I have central air/heat so it is either on for the whole house or not... plus the vent cannot be completely closed to block off the heat coming in...

polobunny · January 5th, 2008

Quote:

Originally Posted by screwballl

I have central air/heat so it is either on for the whole house or not... plus the vent cannot be completely closed to block off the heat coming in...

Bummer. :/

Craigleberry · January 5th, 2008

It is summer here in oz so I have the opposite problem lol

Quote:

Originally Posted by gvblake22

You picked a bad (good) time of year to start a temperature comparison thread!

Here's my E2140 at stock with a 63 degree F ambient room temperature and air cooling...
http://i3.photobucket.com/albums/y90...wintertemp.jpg
http://i33.photobucket.com/albums/d5...50140Small.jpg
http://i33.photobucket.com/albums/d5...50141Small.jpg

Nice try running Orthos for a little longer I can get them results when I run mine for three minutes too.

I run mine for about ten minutes.

One thing I might have to do is pull my heatsink off and apply some mx-5 in the proper way I think that I may have applied the paste in a line the wroong way

Yellowhello · January 5th, 2008

Wow, excellent results Blake!

halutzparilla · January 5th, 2008

Quote:

Originally Posted by yellowhello

Ahh, much better! Thanks for the new pic. Maybe if you got some 7/16in. tubing you wouldn't have to use all those elbows.

i might consider that when i can the chance after i finish with my training during my vacation time...

**gvblake22** · January 6th, 2008

Quote:

Originally Posted by Craigleberry

Nice try running Orthos for a little longer I can get them results when I run mine for three minutes too.

I run mine for about ten minutes.

Yeah, I got impatient, it probably only would have gone up maybe 3 more degrees in ten minutes though.

January 4th, 2008	#31
Stormcrow HL's Technomancer Join Date: May 2007 Location: Frozen North Posts: 1,168 Blog Entries: 1	Re: C2D Core Temp. Post your screen shot Probably they haven't updated the generation list in awhile, and since Core 2 is basically a revised dual core Pentium M it shows up like that.

January 5th, 2008	#32
gvblake22 Modder-ator Join Date: Dec 2005 Location: Tempe Desert Posts: 6,356 Blog Entries: 1	Re: C2D Core Temp. Post your screen shot You picked a bad (good) time of year to start a temperature comparison thread! Here's my E2140 at stock with a 63 degree F ambient room temperature and air cooling... Last edited by gvblake22; January 5th, 2008 at 07:20.

January 5th, 2008	#33
screwballl Colonel Calamity Join Date: Oct 2006 Location: Sandy South Posts: 6,279 Blog Entries: 6	Re: C2D Core Temp. Post your screen shot I would say bad because heaters are running this time of the year heating up the computer rooms... during the summer with the AC on my room is about 75º instead of 82-84ºF Thanks HL and Corsair! My opinions are my own and not representative of this site or its members.

January 5th, 2008	#35
screwballl Colonel Calamity Join Date: Oct 2006 Location: Sandy South Posts: 6,279 Blog Entries: 6	Re: C2D Core Temp. Post your screen shot I have central air/heat so it is either on for the whole house or not... plus the vent cannot be completely closed to block off the heat coming in... Thanks HL and Corsair! My opinions are my own and not representative of this site or its members.

January 5th, 2008	#38
Yellowhello Stoopid Head Join Date: Mar 2007 Location: Pacific Grove, CA Posts: 4,254	Re: C2D Core Temp. Post your screen shot Wow, excellent results Blake! Intel Core 2 Duo E8400 + Thermalright Ultra 120 Extreme DFI Blood Iron P35-T2RL + Thermalright HR-05 IFX 2GB G.Skill 800MHz F2-6400PHU2-2GBHZ EVGA GeForce 8800GTS 320MB Silverstone Decathlon 650W Western Digital 250GB SATA II

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Real Temp vs. Core Temp?	PkL728	Overclocking	10	June 17th, 2008 10:19
Core Temp .95.4 will not load	Kent10	Software & OSs	11	November 18th, 2007 11:04
Broncos CB Williams shot and killed	stinger608	HL Lounge	9	January 1st, 2007 19:56
Post your record videocard temp...	Sovereign	Graphics	13	November 14th, 2006 19:03
My first ever shot making a website	Lead Head	HL Lounge	39	October 16th, 2006 21:44