C2D Core Temp. Post your screen shot

[polobunny]

Originally Posted by Craigleberry

I meant the other dude thats having problems with loading core temp not you sorry polobunny

No problem. You have a nice rig too, at any rate. ;D
Why not jump by the HardwareLogic Forums Photo Gallery and upload pictures of your build? :)

[Craigleberry]

Originally Posted by polobunny

No problem. You have a nice rig too, at any rate. ;D
Why not jump by the HardwareLogic Forums Photo Gallery and upload pictures of your build? :)

Not yet I have to clean and re paint the inside of the case and sort out the wires.
Here is a taste ( I need to make some filters for my intakes )

[Yellowhello]

That is a monster CPU cooler!

[halutzparilla]

Originally Posted by yellowhello

Hal, I don't understand how your loop works... It looks like there is a Y right before the rad, so which way is the water flowing into the rad? And how is the water getting out of the rad?

It sort of looks like you could have planned the loop out a bit better...

.


there is NO Y connector adn there was never was, i scrap my first pattern, its Res>Pump>CPU>GPU>RAD>Res .... i mounted the rad above the Case.... i never been a good CPU temp but i know the H2O is working because of my GPU 8800GTS temp @ 34C idle from aircooling of 60C idle this under stock speed and Room temp of 75F... it maybe just a bad CPU, but actually not only my E6600 also my brothers E6400 running at 100% = 48-53C with 9500Zalman HSF...

and i'm not the only one exp with E6600 running very high temps, you could google it and there are tons of people with same mobo and cpu exp the same Temp as mine...

[Yellowhello]

Originally Posted by halutzparilla

there is NO Y connector adn there was never was, i scrap my first pattern, its Res>Pump>CPU>GPU>RAD>Res .... i mounted the rad above the Case.... i never been a good CPU temp but i know the H2O is working because of my GPU 8800GTS temp @ 34C idle from aircooling of 60C idle this under stock speed and Room temp of 75F... it maybe just a bad CPU, but actually not only my E6600 also my brothers E6400 running at 100% = 48-53C with 9500Zalman HSF...

and i'm not the only one exp with E6600 running very high temps, you could google it and there are tons of people with same mobo and cpu exp the same Temp as mine...

Oh, hmm, I guess the pic is a little deceiving...

[halutzparilla]

here is another one:


those things are 90deg Elbow coz i cant fit that big fat 1/2ID Tygon without risking kinking inside the case... and the elbow dont make difference with temp...

[Yellowhello]

Ahh, much better! Thanks for the new pic. Maybe if you got some 7/16in. tubing you wouldn't have to use all those elbows.

[Stormcrow]

Originally Posted by yellowhello

That is a monster CPU cooler!

The Thermalright Inferno Fire eXtinguisher, it's a beast. Never realized just how monstrous though until I saw it compared to that X1950.

[RangerXLT8]

Haha my Xeon Quad core 3210 runs at 75 75 70 70 during ORTHOS. That is of course from 2.13GHz-->3.34GHz on air. The Tj Max is 100C.

[screwballl]

Here are mine, remember this is at 84ºF room temp and on air.
I still wonder why TAT says Pentium M